Gender
Male
About
Location
Täby
About Me:
What about me?
Activity Feed
"Well, HERE WE ARE YET ANOTHER YEAR LATER...
I would also very much like to get some reliable information about how to best configure a 3-channel model like the regular Radian with an FC running APM, for instance.
C'mon... Someone, somewhere must…"
I would also very much like to get some reliable information about how to best configure a 3-channel model like the regular Radian with an FC running APM, for instance.
C'mon... Someone, somewhere must…"
"....had to say about the subject ... etc"
"This is what Pi Towers had to say about the ject this morning (https://www.raspberrypi.org/blog/raspberry-pi-3-on-sale/). Quoting from the blog:
Alex says: 29th Feb 2016 at 8:54 am(....) how long will the Zero continue to be made available?
Reply…"
Alex says: 29th Feb 2016 at 8:54 am(....) how long will the Zero continue to be made available?
Reply…"
"Sam,
Thanks for the feedback. Interesting obsevation that one tends to overestimate the actual airspeed. Shows that it is difficult to tell from the ground by eye-sight alone, I guess.
So, great -- now I have some realistic velocity values when…"
Thanks for the feedback. Interesting obsevation that one tends to overestimate the actual airspeed. Shows that it is difficult to tell from the ground by eye-sight alone, I guess.
So, great -- now I have some realistic velocity values when…"
"@Sam Tabor
Hi,
I remember reading somewhere (although not in this thread, I think) that you were planning to empirically find the Radian's glide polar. Have you come to any conclusions or informed opinion regarding the speed for the maximum lift…"
Hi,
I remember reading somewhere (although not in this thread, I think) that you were planning to empirically find the Radian's glide polar. Have you come to any conclusions or informed opinion regarding the speed for the maximum lift…"
"@ Sam Tabor.
Hi,
Nice solution with the plywood "deck" in the picture.
Just a thought: I made a similar arrangement for a homemade vario and Xbee tx in my Radian a couple of years ago. But while experimenting with IMU sensors in approximately the…"
Hi,
Nice solution with the plywood "deck" in the picture.
Just a thought: I made a similar arrangement for a homemade vario and Xbee tx in my Radian a couple of years ago. But while experimenting with IMU sensors in approximately the…"
