I am currently using the NTM Prop Drive Series 28-26A 1200kv for my F550 hexacopter (with MultiWii flight controller), and also on my 3D Printed quadcopter (with Naze32 flight controller)
The problem with this motor is that it has too much vibration.
Read more…Here is my F550 folding landing gear:
http://www.thingiverse.com/thing:759368
Please see the comments on the Thingiverse
Here is my 3D Printed Folding Quadcopter:
http://www.thingiverse.com/thing:748749
I got the original design from here: http://multirotorpilotmag.com/fpvquad/. I did not like the original design because it is too weak, and flimsy, easy to bend. I wante
Read more…I have 2 batteries Turnigy 5000mAh 4S 40C Lipo Pack that I got from HobbyKing about 6 months ago, but only in the last 2-3 months I started to use them about 3 to 4 times per week. Before that I kept them at 50% storage voltage most of the time. I ha
Read more…I have a DJI F550 Hexacopter, and I purchased the landing gear for it, and all the legs broke in just a few lightly hard landings.... those legs are way way way too fragile!!
So I decided to do my own DIY landing gear, and I am really happy with what
Read more…I calibrated the ESCs, calibrated ACC, and also I calibrated Mag, and I don't know what else to do... my hexacopter moves sideways (to the left) when I start it, and I have to land it right away because it will probably flip if I push the throttle hi
Read more…I am building my first multicopter (a Hexacopter), and I am having problems with the speed being too high at lowest throttle level.
I am using MultiWii PRO Flight Controller, Turnigy 9X 9Ch Transmitter, and Turnigy Plush 30 amp Speed Controller.
I
Something about me: my hobby is electronics, and by profession I am a computer programmer. I built a few things, like DIY CNC, and a small robot (Ultrasonic obstacle avoidance robot). I like to play with PIC micro-controllers.
The reason I started wit
Read more…