Gender
Male
About
Location
Scheessel
About Me:
Father of two kids, interests in programming, model-making, astronomy
Please tell us a bit about your UAV interest
Just beginning with UAV's. Some experience with embedded programming...
Hometown:
Scheessel
Activity Feed
"Colin, roger on the keypad code. Thanks.
Michael"
Michael"
"Colin, while looking over your schematic and your code, I got a bit confused about the connection to the button board. The schematic uses SDA/SCL, but the code uses Pins 11-13. Could you enlighten me?
I will continue working on this, even if there…"
I will continue working on this, even if there…"
"I'm in the process of wiring up the LED stripes per your instructions - so far no problem. I've made a small board to mount the ULN2803 instead of wiring it in the air...
After adding the code, I found that I needed to change the variable name…"
After adding the code, I found that I needed to change the variable name…"
"Colin,
great design. It's about what I was thinking building myself. Is it a 128x64 GLCD you are using? If so, it might come handy to add two jumpers in the design to swap pins 1&2 (+5V, GND). That way different types of GLCD's can be used (some…"
great design. It's about what I was thinking building myself. Is it a 128x64 GLCD you are using? If so, it might come handy to add two jumpers in the design to swap pins 1&2 (+5V, GND). That way different types of GLCD's can be used (some…"
"Thanks for the great instructions.
One question: Would this also work with Battery Monitor mode 4: Volts & Current - or is mode 3 absolutely mandatory?"
One question: Would this also work with Battery Monitor mode 4: Volts & Current - or is mode 3 absolutely mandatory?"
"I had the "shifting battery" issue as well. Putting some velcro to the battery seems to be the best solution - I was thinking about something more complex - sometimes you just don't see the obvious...
Regarding the frame weight - I'm glad it is as…"
Regarding the frame weight - I'm glad it is as…"
"I am happy to follow that request. For me, one of the problems was that while the instructions say something like "this side should be mounted downwards". But at that step in the process you actually have the frame upside down - the PDB on top of…"
Hi there...being a complete novice with autopilots and quadrocopters in general, I just got my stock 3DR kit completed and was able to fly.Some observations that might help newcomers to get the stuff together:If you think you have checked everything…
