"Hi Jean
I don´t plan to use any more Lua Scripts,
The new firmware has all the info I Need and it even discovers any sensor you have
like variometer FLVS etc you just setup the screens the way you want it after it discovers the sensor
and seriously…"
"i can clearly say in my case problem solved
I took it out to 1.2km without one rssi warning
brought back due to lossing FPV image i don´t plan to take it out so far
just did it to check the RSSI.
so for me its back to enjoying flying without the…"
"Before all of this I had upgraded from OpenTX 2.0.15 to OpenTX 2.0.17
without a total wipe etc.
So i never thought it would have something to do with it
so i took Alasdair advice and did a total factory reset with frsly firmware and did a clean…"
"Bad weather to test out more with fresh packs...
I gave your tip some serious thought and decided to do a total refresh update of the firmware of the Taranis x9d plus and went ahead and did it to the latest one 2.1.3
The telemetry menu looks very…"
I have been puzzled for some time :)
Frsky you love it for the telemetry features and hate it for this RSSI,
I flew yesterday without any power and connections to the receiver coming from the gimbal FPV connections etc. I disconnected…"
"well today good weather and did one pack testing the XJT Module
In my last post forgot to mention I am using a 3s 2650 lipo pack on the taranis plus
so the good news got to 800m with rssi around the 60 & 70 and then constant RSSI warnings
bad news…"
"Had no luck trying out the external XJT today had bad weather... hopefully tomorrow.
Don´t want to off topic to much but can you pros give me so feedback regarding this for the X9D Plus
EZUHF Receiver 8Ch Diversity + 2 Antennas with
EZOSD RSSI, GPS…"
"Hi Alasdair,
Thanks for the tips.
i will give the XJT module a try and see if it helps. if otherS can fly to 2km without problems why not me...
I have tried difrente locations and all of them in remote areas, no houses no citys just the farms fields…"
"Hi Guys,
I have been pulling out my hair, the little I have left, due to this RSSI X8R Warnings..
I have carefully read forums these posts
I have Taranis Plus x9d that is a different internal board as from the post regarding the soldering of the…"