Gender
Male
About
Please tell us a bit about your UAV interest
UAV Simulation
Activity Feed
I need some help.I have the hardware in the loop sim running between X-Plane 10 and Mission Planner 1.2.31. The connection between the two is fine. I get no throttle in X-Plane. My ailerons, elevators and rudders and such move with my input from the…
"While looking at MP and on the Simulation tab and looking at "AdruPilot Output", everything changes to my stick inputs except throttle. Throttle is stationary at .998.
Sorry for blowing up this thread, I'm just trying to give you the information you…"
Sorry for blowing up this thread, I'm just trying to give you the information you…"
"Can you connect a gumstix and ArduPilot and send the ArduPilot a simple command and when the ArduPilot receives the command, it can push the command to the gumstix starting whatever the command tells it to?"
"And correct me if I'm wrong but isn't Flight Data and/or Flight Planner suppose to show the plane at the airport I have loaded? That isn't happening as well."
"Yes, the imputs change in MP when looking at Radio Calibration. Everything responds except throttle. When I have it stabilized in the air, and max throttle the plane seems to descend and when I give no throttle it will ascend very minimally.
And…"
And…"
"I have set up a HWIL simulation with X-Plane 10 and mission planner and everything works fine except for a few things..
1. Throttle does not seem to work. "Start each flight with engines running" must be checked for flight to occur due to no…"
1. Throttle does not seem to work. "Start each flight with engines running" must be checked for flight to occur due to no…"
