"The first time it happened I did another 3 axis calibration and worked ok but then next then problem came back again. Didn't realise model had to be perfectly still on boot up, perhaps that's the issue then. Will do some more testing. Thanks:)"

"thanks marc :) will defo upgrade asap. One problem I have noticed is accelerometer inconsistency errors that stop me arming. I havent been able to fly/test too many times yet as its a new plane, but in the very few tests i have done, leaving the…"

"Cool thanks Andrew!"

"How important is it to upgrade from 3.5.0 to 3.5.2? My plane seems OK on 3.5.0 so do I need to upgrade? Also if I upgrade minor versions like 3.5.9 to 3.5.2 as opposed to 3.4 to 3.5 do I need to set everything up again from scratch or can I just…"

"Hi, sorry i didnt realise. I just saw big conversation with Andrew Tridgell on the diy drones post with possible similar issue on this post > http://diydrones.com/profiles/blog/show?id=705844%3ABlogPost%3A1899...

I dont even know if its a bug with…"

"I've had no luck reproducing the problem this evening although to get the lots but i just remembered this problem happening one other time during my build. I was showing a friend the half built plane, plugged it in and after 30 seconds or so the…"

"Possible serious bug?… but unsure if its problem is with Arduplane or openLRS. I’m in the process of building a skywalker with arduplane 3.5.0 and during setup and testing on the ground all of my controls went completely crazy, basically no control.…"