Thanks fore the heads up on the Mauch boards. I have had a heck of time finding power modules > 90 amp. I was going to try a AttoPilot next, but the Murch board look like a great option. My heavy lift hexa is capable of drawing > 170 amps.…"
Have you tried entering a value in the measured current box, something like ".3" for 300 milliamps?
Current and voltage sensors will always need to be calibrated. You may need to give it an initial value to work with, and follow up with a DVM…"
You have a couple of options with the Taranis radio:
1.) After turning on the transmitter with the throttle above zero you should be prompted for "Press any key to skip". This will allow you to continue with whatever switch positions and…"
"I see what is going on now - evidently copter picks these up from the telemetry modem as it is plugged in. I had been moving between Telem1 and Telem2 trying to determine why Telem1 was reliable and Telem2 was not. FYI - these modems work…"
"Has anyone else noticed issues with SR1, SR2 values... I had trouble connecting with telemetry to Serial 2, and discovered that its SR2 values were as listed below. All other values for SR1, SR3, etc were all zeroes. Oddly enough, after saving my…"
"Has anyone been able to get FrSky telemetry working with their PR? I have verified that my X6R Receiver is sending telemetry with an FLVSS voltage sensor. I have also tried an X4R which is sending telemetry perfectly with an SPRacingF3 flight…"