Gender
Male
About
Location
Chelsea, MI
About Me:
My favorite hobbies are UAVs and computer programming.
Please tell us a bit about your UAV interest
I am building a UAV for fun and recreation that can carry a decent load and FPV for as cheap as possible (with all the parts from reliable sellers).
Hometown:
Chelsea
Activity Feed
"I can't find anywhere in the log grapher where it says what caused a failsafe (or even that one happened.) Would you mind sending my a screenshot (or being more specific)? Andre K. said:
Yes, download and view using APM Planner 2. Should be easy,…"
Yes, download and view using APM Planner 2. Should be easy,…"
My APM has been triggering failsafes around 11.4v for no reason that I know. It isn't losing radio connection (I'm just a few feet away from my drone usually) and the low battery is set to 10.5v. I want to look in the dataflash logs (downloadable…
I would like to get 6 flight modes on my APM 2.6 with my FS-i6 transmitter. With one mix setting, I have managed to get four flight modes onto Ch5. The setting I have is:Mix #1Mix is OnMaster Ch6Slave Ch5Pos. mix 50%Neg. mix 75%Offset 0%That gets my…
"I got it working! Thank you for your help. The compass motor calibration helped a lot."
"Thanks, I will try that. I already did a compass motor calibration, but not how the guy did it in the video so I'll do it again. Unfortunately, my GPS mast isn't very tall and the cable not very long..."
I think my GPS is not working right with my APM. When it is connected to 10 (yes, TEN) satellites and connected to my computer it says it's moving around a lot when it isn't. When I took it for a flight the first time I put it into loiter mode. This…
"I used a 1045 propellers and it should supposedly have 850 grams of thrust. I want a bigger, lower pitch propeller for more efficiency but I don't know if it will work. Thanks for asking that question, I have the same question!"
