About

Gender

Male


Location

Winston Salem, NC


About Me:

Just a man.


Please tell us a bit about your UAV interest

Casual


Hometown:

Winston Salem NC


Activity Feed

Sean replied to Xichen Shi's discussion Possible APM burnt out. uart0 not responding, no power through output rail
"Did you guys ever find a solution?  I had the voltage sensing resisters soldered with a cable for the balancing port, but I accidentally connected it backwards one day and poof....no more power through the IN or OUT channels.  The unit still works…"
Jul 27, 2013
Sean commented on Janne Mäntyharju's blog post Quick&Dirty 2-servo aileron "flaperon" support for Ardupilot mega
"Yeah; Ch 5 in and out.  I have a Futaba, in which case I have AIL2 set to channel 5 and I have an "airbrake" option that controls AIL and AIL2.  I have that set to do flaps and it works in all modes with the exception of the rudder issue."
Jul 4, 2011
Sean commented on Janne Mäntyharju's blog post Quick&Dirty 2-servo aileron "flaperon" support for Ardupilot mega
"Messing with some code, I've achieved 2 servo aileron flaps (flaperons) working in manual, stabilize, and auto pilot modes and likely all others. The one issue I have remaining is that when the flaps are turned on in stabilize mode, the rudder auto…"
Jul 4, 2011
Sean commented on Janne Mäntyharju's blog post Quick&Dirty 2-servo aileron "flaperon" support for Ardupilot mega
"Am I reading this code correctly to mean that you're outputting to ch 5, but the "input" is calculated from the other aileron?  In other words....a "virtual" Y cable?  If so, is there anything wrong with simply duplicating the other aileron channel…"
Jun 28, 2011
Sean commented on Janne Mäntyharju's blog post Quick&Dirty 2-servo aileron "flaperon" support for Ardupilot mega
"Have you tried this using the latest software?  I just loaded this code into APM 2.1.2 and it doesn't seem to work...  With anything plugged into the CH5 out, the servo seizes to one side and doesn't respond to any controls.  None of the things I've…"
Jun 16, 2011