Gender
Male
About
Location
edmonton, Alberta
About Me:
I like copters
Please tell us a bit about your UAV interest
Quad Hexa
Hometown:
alberta
Activity Feed
"Anyone know where I can find the hexa drawings?
Thanks."
Thanks."
"I got it!!!!! I flipped the ESC wires around, enough to make sure it was still spinning in the right direction. I want to thank everyone for their suggestions. Mike, thanks for the multiple quick responses. Can you give me your paypal address if…"
"Hey Guys,
I've done most of the suggestions. Nothing has helped so far. The thing I have noticed is that the motor facing forward is always the first to stop when I let go of the throttle. It seems that it's spinning slower than the rest, and…"
I've done most of the suggestions. Nothing has helped so far. The thing I have noticed is that the motor facing forward is always the first to stop when I let go of the throttle. It seems that it's spinning slower than the rest, and…"
"Forgot to mention I left the battery on the floor, while it was still connected. It had enough wire to just sit there."
"Hi Jason,
Both are at 0 when I refresh the params.
Thanks."
Both are at 0 when I refresh the params.
Thanks."
"Hi Mike,
I'll take a few shots of the hexa and maybe a video of it while trying to take off.
I took out the battery which was facing forward/backward, and it seems to have moved the balance around.
It doesn't tilt as much forward, and if I hit…"
I'll take a few shots of the hexa and maybe a video of it while trying to take off.
I took out the battery which was facing forward/backward, and it seems to have moved the balance around.
It doesn't tilt as much forward, and if I hit…"
Hi Guys, I'm having a terrible time trying to get my hexa to lift straight off the ground. At this moment, it wants to tilt forward on take off, so I have to stop it right away from tilting over. I have made multiple posts on the troubleshooting…
"I've tried 4 machines already, but no luck.
I can type in anything into the terminal and it won't do anything but go to the next line after I hit enter."
I can type in anything into the terminal and it won't do anything but go to the next line after I hit enter."
"Thanks Chris, that is good to know.
Here is my screenshot showing that nothing happens in the terminal."
Here is my screenshot showing that nothing happens in the terminal."
"This is what my screen shows when I try to connect. Is this normal? It's as if it doesn't understand the switch at all.
It was in position 0.apm.jpg"
It was in position 0.apm.jpg"
"I typed in test and hit enter, it just disapears and moves to the next line."
"hey guys,
When I click on Terminal, in CLI mode, I get:
NOTE: You must disconnect and move the slider switch when done to use other tabsOpened com portInit ACMRAM: 2605FW Version 107----------------------------------------
When I click on…"
When I click on Terminal, in CLI mode, I get:
NOTE: You must disconnect and move the slider switch when done to use other tabsOpened com portInit ACMRAM: 2605FW Version 107----------------------------------------
When I click on…"
"Hi guys,
I too have the same problem. Working on a laptop(tried 4 different machines, 3 of them windows 7 and one Vista), but I don't have a desktop. My A and B light does not blink when I push the reset button. My ESC's only blink when I hold…"
I too have the same problem. Working on a laptop(tried 4 different machines, 3 of them windows 7 and one Vista), but I don't have a desktop. My A and B light does not blink when I push the reset button. My ESC's only blink when I hold…"
