Gender
Male
About
About Me:
Master of Science in Mechanical Engineering Student, Georgia Insitute of Technology. Work experience with: Lockheed Martin, Robotics and Intelligent Systems Engineering Lab (Univ. of Miami), Space and Naval Warfare Systems Center (San Diego), Tesla Motors, Florida State University High Performance Materials Institute
Please tell us a bit about your UAV interest
I am very interested in wide range of commercial applications for UAV's. Being that my engineering interests include design and rapid prototyping, I enjoy designing different UAV's for these various tasks.
Hometown:
Philadelphia, PA
Activity Feed
"Hi Hugues,
Thank you! They are actually 3D printed out of ABS plastic, about 2.5mm thick. They were designed to block the rebounding ultrasonic waves from one sensor hitting the other three, since they are so close to each other. For example, if…"
Thank you! They are actually 3D printed out of ABS plastic, about 2.5mm thick. They were designed to block the rebounding ultrasonic waves from one sensor hitting the other three, since they are so close to each other. For example, if…"
"Hi Thomas,
I actually tested for that exact type of interference. My experiment showed a negligible amount of- if any- interference from the turbulent air flow from the propellers past the ultrasonic sensors. I tested from idle to max throttle and…"
I actually tested for that exact type of interference. My experiment showed a negligible amount of- if any- interference from the turbulent air flow from the propellers past the ultrasonic sensors. I tested from idle to max throttle and…"
