Gender
Male
About
Location
gelderland
Please tell us a bit about your UAV interest
Working on an AUV boat with pixhawk autopilot
Hometown:
arnhem
Activity Feed
"Thanks lkaros, that did the trick! Now around 98% link quality, and the transmission rate is also much better.
The rssi values in Mission Planner are now around 6 to 8. Any idea why they are so low? Before they were around 250.
Noise levels are…"
The rssi values in Mission Planner are now around 6 to 8. Any idea why they are so low? Before they were around 250.
Noise levels are…"
"Hi Seppo
I recently bought anRFD 868+ set to link a ground control station (using mission planner v1.3.4( to a boat (using a pixhawk and ardurover (v3.01) to control a RC boat.
While trying to connect, I get a poor link quality, while the rssi,…"
I recently bought anRFD 868+ set to link a ground control station (using mission planner v1.3.4( to a boat (using a pixhawk and ardurover (v3.01) to control a RC boat.
While trying to connect, I get a poor link quality, while the rssi,…"
Hi all,I am using a pixhawk and ardurover (v3.01) to control a RC boat. I am using mission planner v1.3.41 using an RFD 868+ set to link to the boat, The antenna's and radios were bought 2 months ago as a kit from rfdesign,While trying to connect, I…
