About

Gender

Male


Location

San Diego, CA


About Me:

CTO of Drones Made Easy


Please tell us a bit about your UAV interest

Map geek extraordinaire!


Hometown:

San Diego


Activity Feed

Tudor Thomas @ Maps Made Easy commented on Aaron Serafinowicz's blog post Cloud based UAV mapping with and without GCPs different solutions
"We have had a lot of feedback from users that have found that our calculated results are generally within 1% of RTK measured values and are almost always within 2%. We can't speak to the accuracy of other services but the key to getting accurate…"
Jul 5, 2016
Tudor Thomas @ Maps Made Easy commented on John C.'s blog post Sequoia In The Wild!
"We have successfully mounted a fully gimbal stabilized Parrot Sequoia camera on the DJI Matrice 100 (M100). The data is preprocessed and properly culled onboard with complete onboard image registration to output fully aligned imagery that is ready…"
May 12, 2016
Tudor Thomas @ Maps Made Easy commented on Aaron Serafinowicz's blog post Cloud based UAV mapping with and without GCPs different solutions
"For comparison's sake and with Aaron's permission, we did a sample using a basemap to do the georeferencing.  If you are going to judge a map's accuracy by how it lines up with a basemap, you might as well use that basemap as the input.  It only…"
Apr 7, 2015
Tudor Thomas @ Maps Made Easy commented on Aaron Serafinowicz's blog post Cloud based UAV mapping with and without GCPs different solutions
"Aaron,
Yes, we certainly made some adjustments yesterday that resulted in a flatter models in our Geotagged Image and Manual Georeferencing workflows.  These modifications are permanent. We had been accepting our outputs as being pretty good, but…"
Apr 7, 2015
Tudor Thomas @ Maps Made Easy commented on Aaron Serafinowicz's blog post Cloud based UAV mapping with and without GCPs different solutions
"We would be glad to take a look at some of the Pixhawk data files if anyone is interested in passing them along. We have an online log file viewer that doesn't require the upload of any files to be used.  It provides a quick way to view your basic…"
Apr 6, 2015
Tudor Thomas @ Maps Made Easy commented on Aaron Serafinowicz's blog post Cloud based UAV mapping with and without GCPs different solutions
"Aaron,
Thanks for the writeup! We will look into the cause of that offset. Clearly that is not supposed to be there! It looks like there was a bit of curvature to the created model that was pulling the edges in. But, if the other services can do it,…"
Apr 6, 2015
Tudor Thomas @ Maps Made Easy commented on Michael Pursifull's blog post Maps Made Easy
"Thanks, Michael. I always love answering good questions. We are excited to join the community."
Jul 21, 2014