Gender
Male
About
Location
ACT
About Me:
PCB Designer, Electronic Technologist, & Industrial Computer Tech.
Hometown:
Fungarvan
Activity Feed
"Hi all,
here are the specs of the radios we have:
* Power output: 1 mW - 1 Watt (0 - 30 dBm), software selectable
* Indoor/Urban range: Up to 3000 ft (900 m)
* Outdoor/RF line-of-sight range: up to 40 miles (64 km)
* RF data rate: 9.6 or 115.2…"
here are the specs of the radios we have:
* Power output: 1 mW - 1 Watt (0 - 30 dBm), software selectable
* Indoor/Urban range: Up to 3000 ft (900 m)
* Outdoor/RF line-of-sight range: up to 40 miles (64 km)
* RF data rate: 9.6 or 115.2…"
"Here is a picture of the fully assembled
board. Apologies for the image quality. Its straight from my phone."
board. Apologies for the image quality. Its straight from my phone."
"Just a quick update. The 2axis gyro & 3 axis accelerometer are installed & working very well. Its just raw data at this stage though.
Last on the list is the Compass, although not being tilt compensated, i am not sure how useful it will be.
I'll…"
Last on the list is the Compass, although not being tilt compensated, i am not sure how useful it will be.
I'll…"
"I'm thinking of making this project all open source.
Where is a good place to upload files, gerbers, code etc etc??"
Where is a good place to upload files, gerbers, code etc etc??"
"Just another quick update. Did a proper evenings programming & soldering this evening & now have the GPS talking to the computer via the PIC, i have some servos moving cw/ccw via commands from the laptop & I have a nice little bluetooth connection…"
"I've seen some really nice surface mount LEDs that have three colors on the one LED."
"Hey Chris. The serial port was just chucked on the so I can interface to hyperlynx easily. No other reason really.
Two gyros onboard & i'll probably end up mounting one more vertically on the expansion port on the read of the pcb. I was hoping…"
Two gyros onboard & i'll probably end up mounting one more vertically on the expansion port on the read of the pcb. I was hoping…"
Hi Guys. I'm new here so go easy eh!Inspired by THAT high altitude glider guy years ago Ive finally gone and designed a pcb.I didn't bother posting before I got the pcb's as I'm sure there are heaps of people with many many great ideas that never…
