We use for example CH5,switch C-3positions and switch D-2positions.

Settings:

1. Transmitter END POINT menu-GEAR -100%

2.SUB-TRIM menu-GEAR -0

3.AUX-CH SELECT menu –CH5-Ls1(Logical switch)

4.LOGIC SW menu.Settings as shown on left.

 5.PROG.MIX1-8 menu choose mix 5

 6.P.MIX5  page 2/2 settings as shown

7.GYRO SENSE menu settings-CH5 and switch C as shown.

 8.GYRO SENSE  menu position 2 to ON.

 9.C switch up,D switch up and set 68%.Pulse with in this set is 1166µs.

 10.C switch middle position,D switch up and set 48%.PW-1264µs.

 11.C switch down,D switch up and set 16%.PW-1423µs.

 12.P.MIX5 menu tab2/2 turn MIX ON.

 13.P.MIX5 tab1/2 C switch down,D switch down and set -(minus)71% at poin5.PW-1554µs.

 14.C switch middle,D switch down,set -(minus)76% at point1.PW-1683µs.

 15.C switch up,D switch down and set -(minus)71% at point5.PW-1814µs

 16.Now P.MIX tab2/2

That's all.There are other ways to do it,no doubt.