Gender
Male
About
Location
VIC
About Me:
Novice in quad copter building Australia
Please tell us a bit about your UAV interest
Trouble shooting and help others
Hometown:
Melbourne
Activity Feed
"SOLVED!!!!!
After many hours scratching my head I found out the problem.
Problem: For some reason, the power regulator in the APM mini is unstable. Which means that whatever you plug into it will cause noise or sudden voltage drops. This perhaps…"
After many hours scratching my head I found out the problem.
Problem: For some reason, the power regulator in the APM mini is unstable. Which means that whatever you plug into it will cause noise or sudden voltage drops. This perhaps…"
"I've spoken to the supplier and they will send me another radio
Regarding the the PWM and GND pins, I don't think there's any issue with that. In fact, it is a good practice to have a good GND circuit throughout.
If the issue is noise coming from…"
Regarding the the PWM and GND pins, I don't think there's any issue with that. In fact, it is a good practice to have a good GND circuit throughout.
If the issue is noise coming from…"
"Hi Micha, to be honest I have not added anything else other than the 3DR.
As I mentioned before, the problem comes even if I just connect the GND and +5 wires which do not involve any processing. The voltage is not dropping below 5v when I connect…"
As I mentioned before, the problem comes even if I just connect the GND and +5 wires which do not involve any processing. The voltage is not dropping below 5v when I connect…"
"Thanks for your reply @Andre K.
Yeah, it looks like electronic noise. Unfortunately I do not have an oscilloscope at the moment so I cannot see what's going on.
Cheers"
Yeah, it looks like electronic noise. Unfortunately I do not have an oscilloscope at the moment so I cannot see what's going on.
Cheers"
Hi There, Thanks for giving me the chance to join this community. I have recently built a 450 quadcopter with an APM 3.1 mini FC, FSi6 radio, simonk 30A ESCs and sunnysky 980kv motors. I have recently received a 433mhz 3DR radio telemetry and since…
