the last week i have had two episodes of total powercut on all motors,with crash from about 400feet as result. both times the i have got back the power for a second a few times on the way down. I have used different battery,so thats not the problem.
I
Read more…After testing my hexa today i have two problems:
AUTO: when i switch from stabilize to auto,it went very fast to a hight about 30-40 meters (default alt set to 10 meters) and then it came very fast down (the motors almost stop) and i had to switch to
Read more…I have a newbuilded hexacopter with apm 2.6 and combi gps+compass-modul.its 100% stabile in stabilize-mode,but when i switch to loiter it starts to drift with the wind.....can anyone tell me how to get it better? I found somthing in the manual,but im
Read more…I am building a flamewheel 550 with dji 2212-920kv motors and 30A opto esc,and APM 2.6....I have the choice of 3 or 4 cell lipo....what will give me the longest flight-time of 5000mah 3c and 3800mah 4c (ca same weight)?
Read more…the lights on the outputside sudenly stopped to light,and there is no power on the outputside. I can not arm it,and it dont connect to missionplaner...easy to fix,or do i have to go to the store and buy a new one? ;-)
Read more…Is it anyone who use happymodel gps-unit with four leads (yellow,green,red and blue) and can tell wich contact on the arducopter(on the gps-contact on the side) the different colours are ment to go to.?
Sorry for my bad english!!(im from norway ;-))
Read more…What will hapen if i fly in auto,and i switch to stabilize between two waypoints,and than switch to auto again? will it continue to next waypoint,or what?
Read more…Im noob,and have a question....if i set a waypoint on the top of a 1000 meter mountain,and want my drone to fly 50 meters over the top,do i have to set altitude to 50 or 1050??
Read more…