Photos

Comments

• 

  sabi March 23, 2009 at 1:24am

  sainilabid kannoth
• 3D Robotics

  Chris Anderson March 22, 2009 at 9:27pm

  A diagonal position means that the sensor's views of the sky and ground are not blocked by the powerpod or tail. It allows the readings to be more accurate.
• 

  Saiful Azuwan March 22, 2009 at 6:32pm

  OK. Notes...
• Developer

  Jordi Muñoz March 22, 2009 at 1:01pm

  Saiful,
  
  Just confirming what Chris A. said... I'm working on it, and is very good! But is recommended to use Z sensor, unless you are planning to use only stabilization.
• 3D Robotics

  Chris Anderson March 22, 2009 at 8:16am

  Saiful, the X (diagonal) position of the sensor is support in ArduPilot 2.1, which Jordi is beta testing now. We should release that in a week or so.
• 

  Saiful Azuwan March 22, 2009 at 7:19am

  Hi jordi, can I use X setup of FMA sensor with Ardupilot 2.0 version like yours? Thanks
• Developer

  Jordi Muñoz March 20, 2009 at 1:35pm

  Is the xBee 900mhz modem... And the Z sensor is next to the GPS...
  
  yes i like it =) and orange to spot it in the sky...