3D printed tray for Graupner MZ-24

Hi again, this is my custom designed tray for my Graupner MZ-24. My goal was to build a small tray that can be removed easy without any tools and small enough to be put next to my transmitter in my bag. I think I succeed... :)

Suggested print settings:

0,2 mm layer height
3 layers all around (top, bottom, perimeters)
40% infill, 3D honeycomb

STL files for download are here.

Since the fixture element connects to the transmitters leg, accurate printing is a must without any print defects on the connecting surfaces (ie. bloobs, holes, etc.)!!! Good luck!

Regards, Adrian

You need to be a member of diydrones to add comments!

Join diydrones

Comments

Wes Bourn March 23, 2020 at 1:13pm

Thanks for sharing your project from 3 years ago. It inspired me to model up my new Futaba T10J and 3d print a transmitter tray for it. I used Fusion 360 and here is a shareable link for it, https://a360.co/2QzO7lB
Rob_Lefebvre January 11, 2017 at 2:38pm

Nice job. I actually just ordered a Futaba FX-22 and I need to get a tray for it. Have been debating between buying one ready-made vs. making one.

This reply was deleted.