Blogs

APM External 10mm Leds Buzzer Module

Posted by Charles lakins on August 19, 2013 at 6:30pm

I submitted final revision to oshpark for a board run today

the rest of the parts should arrive this week for the batch in production

3689543285?profile=original3689543205?profile=original

 

Here is a video of the prototype mockup:

The board consists of :

2x 10mm super bright 20ma red & blue led's
 1x 12mm 5v active 89db buzzer module
2x .5watt 330ohm resistors (or 220ohm)

It's also capable of taking smaller smd leds also as the pad/hole spacing matches most types (may require different resistors to correspond with led used)

 3689543304?profile=original

Tags: apm, buzzer, external, leds, module
E-mail me when people leave their comments –
Follow

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • Charles lakins September 19, 2013 at 5:51am

    my email is in the last picture posted email me at the gmail address and I can get a shipping qoute for you 

  • Amadeu Paulo da Silva Junior September 18, 2013 at 5:42pm

    Good... How can I pay? Do you accept Paypal?

  • Charles lakins September 18, 2013 at 5:13pm

    I can make then shorter or longer as needed I can look into shipping usually its an additional $5 to overseas destinations, I need to ship one to determine the shipping costs to usa then I can set the price shipped accordingly for a Shipped price

    so for now it would be $12 plus shipping

  • Amadeu Paulo da Silva Junior September 18, 2013 at 4:42pm

    Very nice!!!! How much and how long is the wires? I´m in Brazil (CEP 89201-100 -  CEP is same as ZIP Code). You can use your national post service to ship it. They have a partnership with Brazillian Nationa Post Serviçe. Slower, but cheaper than expresses companies.

    Thanks again.

  • Charles lakins September 18, 2013 at 3:05pm

    I have a pinned version also

    a6112975-242-P9170188.jpg?width=350

    I can consider shipping unpopulated boards also (pending cost to destination)

  • Amadeu Paulo da Silva Junior September 18, 2013 at 2:05pm

    I´m really interested. Can you suply only the board? Thanks.

  • Charles lakins September 17, 2013 at 8:08pm

    https://www.youtube.com/watch?v=pXFzZ6-mSK0

  • Charles lakins September 17, 2013 at 8:05pm

    Boards arrived today and the assembly begins

    a6111273-143-P9170182.jpg

  • Charles lakins September 8, 2013 at 3:22pm

    a6087968-88-P9080140.jpg?width=200started making up the cables for easy keyed connections to the apm

    black & red = arm

    blue = gps

    green = buzzer

  • Charles lakins August 23, 2013 at 5:21am

    looks like Seedstudio has the best prices I can find so far, for a 100 board production run

    just verifying the files are reading on their end ok and will have some available soon

This reply was deleted.