Because E-Flight Apprentice RC is very popular airplane and the fact that you can buy any replacement part for it I decided to design a 3D printed kit that would turn it into a Drone. The kit blends perfectly with the wing, it gives you easy access to the electronics from the top and also increases the wingspan by 3 inches. I am using the APM 2.6 but it could be used with any other autopilot, there is plenty of room, on the front I have a grill to let the air cool off the electronics and also a flat spot to install your GoPro or any other camera. I will have some kits available soon but you can also do it yourself, 3D printed frame available at https://www.shapeways.com/model/2743456/a-d-k-apprentice-drone-conversion-frame.html.
Appreciate any comments.