Posted by jlcortex on February 25, 2009 at 11:30am
Hi,I am working in this project, it is a bidireccional RC transmitter.Sometimes, i think than conventional transmitters start to have no sense for uav projectsThis is a proyect with a small board with ARM7 (NXP LPC2xxx) and a Xbee PRO with 60 mW (similar performance than standard transmitter) and a Bluetooth module to connect with a PDA.This board have 9 analog inputs for joysticks, and other controls, battery voltage..., it try to be a whole solution with charger connector for charge transmitter battery and PDA battery...We are working in a graph tool in order to show flight instruments in PDA.jlcortex
I have a walkera transmitter from a broken helicopter, this transmiters and i have also a e-sky usb transmitter, both sticks are suitable for this design, they are not good quality but i think it could be enought.
another idea is to use spare parts of wfly transmitters, i have a 9 channels wfly and it seems good quality and it can no be expensive.
Hello man, great initiative! Once a tryed to build something similar my FUTABA radio but I didn't find the sticks. The electronic and the case were easy... but to find the good sticks still a mistery. Did you find it? Good sticks are the first step to a good control.
Comments
I have a walkera transmitter from a broken helicopter, this transmiters and i have also a e-sky usb transmitter, both sticks are suitable for this design, they are not good quality but i think it could be enought.
another idea is to use spare parts of wfly transmitters, i have a 9 channels wfly and it seems good quality and it can no be expensive.
-
1
-
2
of 2 Next