Blogs

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • Moderator
    Gary Mortimer March 13, 2010 at 2:23am

    http%3Cobject%20width="480"%20height="385" ' />

  • Moderator
    Gary Mortimer March 13, 2010 at 2:21am
    Well fibre tape and a flat carbon spar will make that happen, it is probably stronger than the ply Raven

    Remember the real raven uses an energy disbursement method at landing, it seems to be a fast and furious flyer

    %3Cobject%20width="480"%20height="385" ' />


    Tell me more about the Easywhale, perhaps start another thread with lots of photos.
  • Moderator
    Robert Krogh (hooks) March 13, 2010 at 2:11am
    The easywhale (foamy) is no problem I have contacts ready to buy from supplyer inside china. The man behind this Platform lives in the middel of china so shipping will be the biggest cost.

    One big problem whit this platform! It's made of weak foam, so you need to make it stronger with thin Glassfiber.
  • Moderator
    Gary Mortimer March 13, 2010 at 1:24am
    I would hold back on the copy of the raven and ask about the foam one if I were you, looks better to my untrained eye. Unless you can ferret out some pictures of the Raven back end. I was immediately worried about the hinges used, they could be replaced, and from the shot supplied it looks short coupled compared to the real one. The foam airframe, with high tail to keep it out the way and big enough to put a half litre of coke, the drink I mean looks good. I might even join the list for one of those. If the chaps turn out OK!!
  • Admin
    Morli March 13, 2010 at 1:23am
    Hooks,
    Sure , many will be interested including me but shipping will be to different address. will that be ok?
  • Moderator
    Robert Krogh (hooks) March 13, 2010 at 1:01am
    hehe you got yourself a job..

    BTW I'm getting closer to the supplyer of the COPY raven.. Price about 80 $, but he want to sell more the only one at a time.. Any interested?
  • Angus Peart March 13, 2010 at 12:10am
    Hooks: I should go into intelligence, it only took me 25 seconds to whois the domain and get the same information! heh...
  • Moderator
    Sgt Ric March 12, 2010 at 11:05pm
    Ok, thanks for that.
  • Moderator
    Robert Krogh (hooks) March 12, 2010 at 10:36pm
    I have no part in the website, found the info on RCGs.
  • Moderator
    Sgt Ric March 12, 2010 at 10:28pm
    What is your part in this, Hooks, if I may ask?
This reply was deleted.