Custom made UAV Airframe

Hello all,

We're releasing a brand new UAV airframe featuring super light weight glass fibre laminate construction with carbon fibre and kevlar reinforcement in critical stuctural area. All removable 3 piece wing, tail booms, v-tail and 2 large hatches allowing excellent access to fuselage internal area. All wing and tail surfaces are hollow composite mouding which you may install extra hardware in the central wing section.

The airframe comes with carbon fibre main landing gear and machined aluminium steerable front wheel assembly. All nuts, bolts and nut plates are mil-spec.

This airframe is made to endure the daily usage and handling using lesson learned from hundreds of hours operating other UAVs in theaters. You may choose to buy an empty airframe or with any of the optional items listed below

Alternatively you can also request a full carbon version which will be even lighter but be aware if use 2.4ghz RC gear in a full carbon airframe may not yeild happy ending!

Specifications:

Wingspan: 2500mm / 98"

Length: 1767mm / 69.5"

Gross weight: 11kg max

Control: Ailerons, Flaps, Ruddervators, Throttle, Steering

Recommended engines: 26cc to 50cc 2stroke or 4 stroke gasoline or equivalent eletric motor

Options:

- All control linkages and mil-spec wiring harness setup and installed

- High power Hitec servos or UAV grade servos

- Installation of engine of your choice with all fuel tanks and fuel system installed and tested

- Onboard electrical generator - please specify how may watts you want and voltage 12V or 24V typical

- Integration of autopilot - we use CloudCap Tech, UAV Navigation or Micropilot

- Navigation and Strobe lights (aviation grade)

- Transponder

- Fuel injected 2 stroke or 4 stroke engine

- Balistic recovery parachute

We're in Melbourne, Australia and we'll have our website up shortly with other products. Feel free to contact me at this time for pricings and options.

Ryan

You need to be a member of diydrones to add comments!

Join diydrones

Comments

eduardo April 23, 2013 at 9:43pm

Ryan, i sent tons of mail asking about the price of saber and not receive anything.

i sent mail from my personal email (hotmail) and from my company email.
Admin

Thomas J Coyle III January 22, 2013 at 4:21pm

@Antonius K,

Their website is working. Try there.

Regards,

TCIII
Developer

Antonius Lourenço Kasbergen January 22, 2013 at 4:01pm

Sorry, is this project and website alive?
Ryan August 31, 2012 at 8:15am

Hi all,

Thank you for your interests. We're busy moving into a new and larger facility this week to meet the production level. We have fixed the contact page on our website www.compositesuav.com so please feel free to contact us there.

Cheers,

Ryan
Ravi August 31, 2012 at 1:30am

hi ryan, i would like to buy one of your UAV airfremes. can u please tell more details about the frame u r offering.
Matt H June 24, 2012 at 1:05pm

The email address on that site and the contact us form are returning errors.

If you do provide a hobbyist version of the Javelin, I'd love to hear about it.

I saw that these options were not priced terribly competitively:

http://www.fpvflying.com/categories/FPV-UAV-RC-modelplanes/

Thanks,

Matt
Ryan June 24, 2012 at 5:23am

Sorry for the late reply.

Here is the website (still updating daily)

http://www.compositesuav.com

we are in Melbourne,Australia.

Cheers,
Thomas Nunner June 24, 2012 at 12:35am

Hi! Any news on the website?
Thomas Nunner June 16, 2012 at 2:51am

I really like the design! Ryan could you post a link to your website?
Brandon Smith June 15, 2012 at 9:51am

How much are we looking at for the 2500mm with all of the options?

of 2

This reply was deleted.