Blogs

Er9x transmitter now with MavLink

Posted by Earl on March 19, 2012 at 9:30am

3689448874?profile=original

The er9x transmitter now will display MavLink data on the LCD.

Gerard Valade a DIYdrones member wrote the software and myself who was the principal debugger.

Works at 19200 and 38400 baud. Still have a problem with 57600 baud. Some kind of timing issue yet.

Here is a pic of the arduplane 2.30 MavLink display on the er9x.

There is an Xbee inside the er9x to receive the MaveLink data from the APN2.0 purple board.

We will post the er9x firmware soon.

Earl

E-mail me when people leave their comments –
Follow

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • Adam Scriven March 19, 2012 at 4:01pm

    @Pete Hollands: I'm no expert, but I believe you can get all the 9x information on: 9xforums.com

    9xforums.com
  • JP March 19, 2012 at 3:12pm

    Awesome! regret my 7C now. hehehe

  • Developer
    Pete Hollands March 19, 2012 at 3:05pm

    is this the site ?

  • Developer
    Pete Hollands March 19, 2012 at 2:57pm

    Is this project open source ?

    If so :

        Where is the repository so we can read the source code ? (and download)

    Best wishes, Pete

  • Distributor
    Dany Thivierge March 19, 2012 at 11:58am

    Wow Time to MOD again the 9X!!! can you please post a step by step instruction from scratch? and tools to use? 

    that would be superb! 

    Thanks! 

  • Patrick Dudley March 19, 2012 at 11:57am

    Nice one Earl ! .... can't wait..

  • Earl March 19, 2012 at 11:13am
    Have not tested range. I have 900mhz also that I use.
    Earl
  • penpen March 19, 2012 at 10:53am

    Does 2.4G Xbee module working correctly with 9x 2.4G ? No interferences ? No efficiency reduction ?

  • Anish March 19, 2012 at 10:37am

    this projects sounds cool

  • ThomasB March 19, 2012 at 10:24am

    @Earl

    Nice project.

    Will definitely use/test it when it's ready 

This reply was deleted.