Blogs

Remotely controlled, fully autonomous aerial system

Posted by Ivan Stamatovski on December 9, 2016 at 3:30pm

Hi guys, check out the second episode of our show with Grant Imahara from Mythbusters sponsored by Mouser and Intel. 

In this episode we go more in-depth into the electronics and systems developed specifically for this project. You will see our proprietary mechanical design for centering the drone and placing it on top of the charging pads.  

This project represents one of many uses for our remote drone deployment platform in the cloud - Global ARC. 

Interested to hear your thoughts. 

E-mail me when people leave their comments –
Follow

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • T3
    Krzysztof Bosak December 13, 2016 at 10:56pm

    If it's remotely controlled, then there is Remote Controller. Consequently, this is not fully autonomous as it depends precisely on existence of said controller. Therefore this is not about Fully Auntonomous Systems.

  • Developer
    Andy Little December 10, 2016 at 9:54am

    Nice application. Would be nice to see it mention ArduPilot somewhere on the site. I say that since it

    Looks like APM planner at 2:47 in the video. Also seems to be a 3DR modem and a minimOSD on the desk.

  • Developer
    John Arne Birkeland December 10, 2016 at 8:13am

    I'm always fascinated why people make videos for the tech crowd, and then they don't talk about technology in any detail at all. But at least it's more relevant then the McDonald's deal.

This reply was deleted.