Hi all,


Sorry guys for keeping spamming the site with all these UAV frames and platforms.
But somebody gota do it.

My newest find is the nice UAV platform are made in Asia but not Chinese made.





This UAV platform are all made of fibreglass in the layup with epoxy polyester.

Specs.

Wing span 2200mm

Fuselage length 1525mm

Flying weight up to 10kg

Wing area 80 dm2

Wing Material composite

Fuselage Material Fibreglass

Engine 30cc


__________________________________________________________

I plan to build this UAV with the FY3-zt Autopilot, the autopilot is ready for installing with the 433 Mhz data link for some range flying. (Electric motor set-up, don't like all the noise pollution in the air) ;-)

If anyone should be interested in the platform please send me a message. The platform will not be posted on my website before it's tested.

Price for this beauty is just under 2K with 30cc gas engine. Without engine 1.8k. (Yes it's a little pricey, but when you want things which smells right then it's gonna cost right)

BTW: Is everyone flying Q-coptor and is fixed wing getting old fashion now? ;-)

Views: 3462

Comment by tycinis on November 1, 2010 at 11:50am
nice bird !
Comment by Sky Monkey on November 1, 2010 at 11:57am
Who makes it?

Moderator
Comment by Sgt Ric on November 1, 2010 at 12:27pm
Actually I enjoy your "finds". Its good to know whats out there.

I agree with your comment that all the posts seem to be about the quadcopter theses days.

Until a 'copter can carry 2 x DSLRs and a nose camera, I'll stick to fixed wing.

T3
Comment by Rory Paul on November 1, 2010 at 3:11pm
I see airframes like this and I want two....then my wife comes by and reality kicks me in the rear...

Admin
Comment by Thomas J Coyle III on November 1, 2010 at 6:33pm
I think that I will stick with my Maja as it only cost ~330 USD shipped.

Regards,
TCIII
Comment by palo sestak on November 2, 2010 at 1:06am
Nice bird, seems very similar to mine. Its not completely composite only the fuselage.
If someone interested i have one for sale cause i decided to make another one with different wing profile.
Look here.
http://www.rcgroups.com/forums/showthread.php?t=1139455
Video from previous airframe
http://vimeo.com/11508347

Moderator
Comment by Robert Krogh (hooks) on November 2, 2010 at 1:11am
@ Thomas
I also have the Maja Platform! Collecting dust now!
Maybe it's me, but it really fly like a pig. Motor mount is placed too high!

@ Rory Paul: You are so right, but this time my wife gets two pairs of shoes. :-)

Moderator
Comment by Robert Krogh (hooks) on November 2, 2010 at 1:19am
@ Palo Sestak

Nice work!
Comment by Richard T Leiterman on November 7, 2010 at 4:17pm
Hi ... The name is Richard, and I'm new to group, could you pls provide me with the web site information on the new twin tail UAV platform that you just purchased fm overseas. I've been looking for one just like it for guite some time. Thank you your time and assitance. Hope to hear back fm you. Richard T. Leiterman ( dickdar1@verizon.net )
Comment by mahmood on January 27, 2011 at 3:08am
where did you get this from?

Comment

You need to be a member of DIY Drones to add comments!

Join DIY Drones

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service