Blogs

Moderator

T3 season two, the multirotor one.

Posted by Gary Mortimer on February 22, 2013 at 5:30am

3689505259?profile=original

Its been a while so lets try again. Had a hangout with Chris and we briefly spoke about the next T3 round. Chris will work on a top prize ;-)

The mission is simple, get airborne climb to 20m 

Fly a cube with 50m sides, pausing for one minute at each corner, so your flight time cannot be anything less than 8 minutes..... Bonus points if you can stay longer at each corner....

The neatest cube KML wins.

If you can do this with a 3D aircraft I feel you would have a very strong chance of winning!

I will close the competition on April the 14th. I will be looking at where you are flying very closely. Please don't try this in public places or within 500m of any building / road. 

Tags: t3
E-mail me when people leave their comments –
Follow

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • Scott Berfield April 14, 2013 at 8:08pm
    Thanks, I missed that post. Oh well. If your aren't crashing occasionally, you aren't trying hard enough.
  • Rob_Lefebvre April 14, 2013 at 5:47pm

    Scott, if you look earlier in this thread, I posted explicit instructions for the altitude changes with 2.9.1.  It's a bit broken, so it required a bit of a hack.

    Best way to clean out the motors would be with automotive brake cleaner.  It's the same chemical as electrical cleaner.  Just don't do it in your house. ;)  And be sure to oil the bearings really well after, as it will completely strip them of oil.

  • T3
    Richard Boyhan April 14, 2013 at 4:13pm
    Sorry to hear about your crash. To make the vertical parts work you need enough delay to climb or descend. This might change in the future code.
  • Scott Berfield April 14, 2013 at 2:49pm

    Gave this a try today - not so good. I pushed a little too far past where I should have on battery life and came down hard. Oh well, no real harm done - the quad is built to come apart without breaking things so all I lost was about 3/4" of one arm. Anyone know how to get mud out of outrunners? :)

    Question for you gurus - the quad was hitting the corners pretty well, but I guess I don't really understand how to script a vertical elevation change. I had expected that if I were loitering at a specific Lat/Long ant 20 meters, and the next waypoint was that same lat & long but at 70 meters, it would simply ascend. Not what it did. Got lots of diagonal climbs and descents. 

  • T3
    Aerhead April 14, 2013 at 4:14am

    Enrico

    The first of the many tasks I would like to accomplish is precision photos of crops and the Autoquad is ready to do what now.  The rest of the tasks are closer to the ground so the Autoquad will need more sensors and more precise GPS to do those jobs..

    Larry

  • Norbert Machinek April 14, 2013 at 3:19am

    Good job, Bruno - and excellent results for someone with only 3 months of experience in RC!


    btw: your kmz file ends up over West-Africa. When I type in your coordinates it ends up in the Mediterranian Sea, South of Sardinia?

  • Scott Berfield April 13, 2013 at 11:44pm

    Is the AQ hardware available form any US distributors?

  • T3
    Richard Boyhan April 13, 2013 at 7:02pm
    Excellent job Bruno. I don't know about you, but I've had a blast competing. I'm looking forward to next challenge. Again congratulations on a great job.
  • Scott Berfield April 13, 2013 at 5:03pm
    Very nice. FYI, for planning the mission, I just had Mission Planner generate a "circle" with a radius of 35 meters with four waypoints. This gave me a square with sides of app. 50 meters. Entered the lat and long into excel, then planned out the steps to draw that square 70 meters up then 20 meters up plus 2 ups and 2 downs at the edges. Only repeats are horizontals to save battery. Entered it into MP and now am watching marble sized hail come down. So it is all theory for now. ;)
  • Rob_Lefebvre April 13, 2013 at 4:35pm

    Nice work Bruno.  You should be proud of that, newbie or not.  But the fact that you did it with only 3 months RC experience, even better.

    Just successfully running the mission at all demonstrates you've achieved a decent level of knowledge.

This reply was deleted.