Thermal Imaging Camera Competition (FLIR ONE vs SEEK Thermal)

Hey guys i have been keeping an eye on the thermal imaging market trends.  Recently FLIR launched their new thermal imaging camera for the iphone 5!!  Thermal cameras traditionally sell for thousands of dollars for even an entry level unit but with the introduction of the FLIR ONE thermal camera these prices are being challenged.  The FLIR ONE is designed for the iphone 5 and retails for $350.  Well now FLIR has some competition!!  Seek thermal has just launched (9/25/2014) there thermal imaging camera for android and iphone which will retail for $200.  Some specs  of each below.....

FLIR ONE:  http://www.flir.com/flirone/

  • Fits iphone 5 and 5s only (it is designed to mount to a supplied i phone cover)
  • Thermal image resolution???? (uses their Lepton thermal camera)
  • Uses FLIR's thermal mixing (basically its the thermal image with a visible light image overlay to better outline the actual image)

Seek Thermal:  http://thermal.com/index.html

  • Available with either a standard iphone connector or with a micro USB connector (see their website for compatibility)
  • Thermal image resolution:  206 x 156 Array (uses the Vanadium Oxide Micro Bolometer)
  • 32136 pixels
  • No thermal mixing as in the FLIR ONE 

 

Seek Press Release:  http://thermal.com/img/press-assets/release/seek_thermal_pr_9-25-24...

Views: 45209


Moderator
Comment by Bill Piedra on September 30, 2015 at 11:09am

I see that you're in Poland.  Can you purchase the seek thermal camera there? 

Comment by Marcin Krawczyk on September 30, 2015 at 11:13am

For I don't see ability for direct shipment to Europe, but I'll try different way ;-)


Moderator
Comment by Bill Piedra on September 30, 2015 at 11:15am
Comment by Marcin Krawczyk on September 30, 2015 at 11:19am

Asked :-)

Comment by Fnoop on September 30, 2015 at 12:48pm

@Bill - that's awesome, I'm very interested!

Do you have any footage?

When I looked a while ago at connecting the seek to a raspberry or similar, the problem seemed to be that there's a lot of magic done in software to get rid of the calibration pixels and gradients.


Moderator
Comment by Bill Piedra on December 18, 2015 at 10:56am

OPEN BETA TEST: Low Cost, Open Source, Streaming Thermal Camera

We’re looking for people who might be interested in testing a low cost thermal camera designed specifically for drones. The systems is based on the SEEK Thermal Camera and offers simple plug and play operation. It will connect to your DJI Phantom 2 Vision’s Wifi network when it’s powered on.

The images rival ‘pro-grade’ thermal cameras, but at only $500 this one costs 1/3 as much. It offers a 204x156 pixel thermal image at 9hz in 8-bit color or black & white.

If you’re interested in participating in this beta test, please message me or send email to the address at the end of the video. Testers will receive a fully functional streaming thermal camera system, downloadable software and app updates, plus a substation discount off of the retail price.

I wish I could give these away for free, but I can’t afford that. The fee for beta testers is $500. Please forgive the crudeness of the attached video. I’m a programmer and drone builder, not a videographer.


Moderator
Comment by Brian on May 28, 2018 at 12:24am

@Bill @John do you have any updated details?

Comment by Fnoop on May 28, 2018 at 1:31am

Comment

You need to be a member of DIY Drones to add comments!

Join DIY Drones

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service