For all those who fly RPi multi-rotor =)

1 Member
Join Us!

pi prepped for the sky

You need to be a member of diydrones to add comments!

Join diydrones

Comments are closed.

Comments

  • Vavooon July 23, 2013 at 6:24am

    Hi. Everyone who want to build own RPi-based copter can use this open-source code: https://bitbucket.org/lastsurvivor/innode/overview :)

  • David Story May 27, 2013 at 10:17am

    Not that far along, but doing a similar build.
    Raspberry Pi for the flight controller, code written in Go.  Access the Gyroscope, Accelerometer, Magnetometer(Compass), and PWM driver via the i2c bus.

    rpiquadtop.jpg

    rpiquadfront.jpg

    rpiquadback.jpg

    Android app on tablet sends commands to the RPi via wifi.

    Got my RPi camera, so, I'll add that too, I've used mjpg_streamer before in my RPi backup cam.

  • Vavooon January 21, 2013 at 11:52pm

    Thank you, i`ll try.

    Do you know any OpenSource software for RasPi-based copters?

    Does everyone else heve any progress?

  • Vavooon January 14, 2013 at 8:39am

    Hi. I finished to build my copter yesterday. And i broked all propellers :)

    I have the flight base now and can start integrate RasPI into my copter.

    I will use WiFi for the communication and webcam for FPV.

    Also i will use existing MultiWii for copter stabilization and basic control.

    ReneeLov3, what do you use for the wireless connection?

    Do have any progress with camera? I tried to stream it but i had errors.

This reply was deleted.

Forum

Photos