A group for those of us with the X-UAV Talon and Mini-Talon

128 Members
Join Us!

You need to be a member of diydrones to add comments!

Join diydrones

Comments are closed.

Comments

  • Elios,

    Foam presents NO obstruction to radio waves, so you can safely have the antenna inside the body....

    Tim, info noted, there is a miniTalon lying on the bench :-)

  • I haven't run a full battery down, but from the tests I've done, I estimate 35-40 minutes. I'm looking to try out the new Multistar batteries, which would permit me to go to a 4S 6600mAh battery for the same weight as the current 4S 5000's... and I expect that should get me an additional 10 minutes (so call it 45 minutes for safety).

  • @Gustav  I am talking about the big Talon. 

    @Tim: What flight duration are you able to do with the mini with the 5000mAh?

    In mine, I will have 1 Mushroom antenna coming out from the frame.

  • If you're just doing gentle cruising, then 75W/point (or about 150-160W per kg is enough)... having a little margin would mean about 200W per kg is sufficient...

    My mini talon comes in at 1.5g with 5000mAh, pixhawk AP, power train, canon ixus camera and a few additions (pitot, gps, telemetry radio). It draws about 4 amps at cruise at 15-16 m/s (about 58 kph).

  • Are you talking about Talon, or miniTalon ?

    I might have too big a motor in it, but that is what I had, and since I hand launch, I wanted the power !

    I work from the "100W per pound" rule of thumb might be overkill on my planes, but it gives me a slight edge when things go wrong.

    My Talon actually falls under that rule....

  • Ok, I weighed it, 2.88 Kg

  • @Gustav

    every battery 3S 4000mAh weight 320g, which means it is around 960g with the cable. 

    Have you any other accessories like Cameras, Autopilot,.....in it?

    Some users were saying that the cruise amp should be below 4 Amps, Don't you think the 7-9 is high?

    Elie

  • Elios,

    I haven't weighed the plane yet.

    I'm using 3 HobbyKing 4000 mAh 3 S packs in parallel, with a 900KV 3548 motor, 12X6 prop.

    I can safely do 70 minutes at 60 Km/h.

    My Talon draws between 7 and 9 Amps at that speed, 7 in smooth air, up to 9 if it has to fight turbulence.

  • @Tim: nice joke.

    @ Gustav: We will fly at 100m ASL with wing extension. What is your flight weight at take off and what flight duration are you able to make with the 12Ah? 

  • @Elios,

    Welcome!

    All depends how high above sea level you live.

    At 600' ASL my Big Talon, with 12000mAh 3S and GoPro, no wing extensions, flies best @ 60 Km/h.

    Previous posts on this forum will give you the param file.

    And as Tim said, if you have things like FPV antennas sticking out out, performance change.

This reply was deleted.

auto grid mission with my talon

Hi friends,Can anyone help my to fix this problem regarding strange and unuseful turns on grid mode (just turns on South part) versus the northern that seem to be fine?thank you.The plane ia a TALON with extended wings. L1 NAV 15, dumping 0,80.

Read more…
3 Replies

Pixhawk Mini and Spektrum Controller

Hi friends,I'm currently trying to integrate a pixhawk into my XUAV talon that I have built for aerial photography. This is going to be my first time using a pixhawk on a plan rather than a copter drone so I'm a bit lost. First, I noticed that in qgroundcontrol when setting up my pixhawk, there is no profile for the talon's v-tail design, is there a guide on here or someone who would be able to help me download or setup a profile in qgroundcontrol that would be appropriate for the talon?Second,…

Read more…
6 Replies

X-UAV Build

Hi all,I'm looking for an airframe that will ultimately be aimed at mapping/orthomosaic type projects and the Talon is one we are certainly interested in.I know this has probably been asked 100 times, but does anyone have any information or could point me to links of existing threads that outline a good build and components that work well with the talon.I'm in Australia so pretty sure there won't be much available here in country so will be looking abroad to build the kit.Are the wing…

Read more…
7 Replies

Quadcopter with Saitek Joystick X56 + Scherrer Tx700 Pro + Rx700 LR +PSU

Hellocan Someone help to connect Saitek Joystick X56 + Scherrer Tx700 Pro + Rx700 LR +PSUin order to fly a quadcopter ?And if it is impossibleHow to connect the TX700 Pro and the Quanum V52 Ground Control System, please? https://hobbyking.com/en_us/winbox-ground-control-system-v52.html https://hobbyking.com/en_us/rx700lr-psu-reseller.html https://hobbyking.com/en_us/tx700-pro-reseller.htmlThanks

Read more…
0 Replies