Gender
Male
About
Location
Cumberland, RI
Please tell us a bit about your UAV interest
Hobbiest at heart
Hometown:
Cumberland,RI
Activity Feed
"the problem is not only with the usb but also just the ppm signal. if i plug in the battery. the apm wont respond to the tx inputs. this happens when i dont have the usb plugged in . just powered through the power module"
ok so i was testing new video equipment. i had the apm plugged in through usb and power module. next time i tried it usb would not connect. the usb powers on the board and gps but wont be recognized by computer. i checked the other apm board to make…
"thanks for the response guys. according to the logs it looks like it goes into failsafe CIRCLE . i only have RTL set up at with throttle failsafe. where is this setting for circle on failsafe
CMD, 3, 2, 16, 1, 0, 30.48, 41., -71.CMD, 3, 3, 16, 1,…"
CMD, 3, 2, 16, 1, 0, 30.48, 41., -71.CMD, 3, 3, 16, 1,…"
"i will try another mission but i saw my recorded video from the mission and about where i lost mavlink connection the plane went into a circle pattern. i thought i had lost the plane becuase it wasnt coming back until i switched it to RTL on the…"
So I have been having this problem. I'm sorta new to apm. So what happens is that when I make a flight plan I would go into loiter mode if I lose the connection between apm and the mavlink. Has anybody encountered this ? i have the GSC failsafe off…
