Gender
Male
About
Location
Niedersachsen
About Me:
I am flying for about 45 years. Models, Hanggliders, Sailplanes und Motorplanes. Due to my age of 64 I reduced it to models now.
Please tell us a bit about your UAV interest
I started with multirotors in 2008 and have some experience with commercial filming from a multirotor. Also I like to build gimbals and have a little experience in building and using a cnc mill which I use to produce my parts.
Hometown:
Bienenbüttel
Activity Feed
"Yes I also had a 2 years period when nothing happened although I flew a lot. Unfortunately times have changed since then. Very often it is not the copter to blame but the man behind the sticks ore the man who built the copter. In my case it is the…"
"No, there was only a little wind. But I have to confess that I used a lipo which had fallen from a table and had a little ditch. Although there is no sign of any problems with that lipo. Could the current drop be a result of foulty lipo?
I admit…"
I admit…"
"Hallo Andre K.,
thanks for your help. I will switch on RC logging in future. So I think my mistake was to fly fast by using roll instead of pitch. But I dont understand why the desired roll was not reached. The stick was full left all the time.…"
thanks for your help. I will switch on RC logging in future. So I think my mistake was to fly fast by using roll instead of pitch. But I dont understand why the desired roll was not reached. The stick was full left all the time.…"
Hi,yesterday my hexacopter crashed due to a complete motorstop from about 50 m.I was flying sideways holding the stick full way to the left in POSHOLD when it happened. After the crash the lights on pixhawk where still on. The logfile says err: cpu…
Hi,I am successfully flying a pixhawk with MKBLCTRL ESCs. Unfortunately Version 3.3x did not support them anymore so that I am stuck with Version 3.21 which has a lot of issues.I have asked before but never got an answer. I try again.Does anybody…
"Hello Randy,
is the version 3.3 still without mkblctrl? If so will the mkblctrl be discontinued?
As I am using these ESCs I cannot upgrade.
Regards
Derek"
is the version 3.3 still without mkblctrl? If so will the mkblctrl be discontinued?
As I am using these ESCs I cannot upgrade.
Regards
Derek"
"Hi Randy,
I have been flying mkblctrl quite happily on a hexa with pixhawk and 3.2. Now I have upgraded to 3.3 and the motors dont start anymore. I think a lot of people at least here in Germany have mkblctrl escs.
Its sad that I have to downgrade…"
I have been flying mkblctrl quite happily on a hexa with pixhawk and 3.2. Now I have upgraded to 3.3 and the motors dont start anymore. I think a lot of people at least here in Germany have mkblctrl escs.
Its sad that I have to downgrade…"
Hallo,I am new to this forum but not to multirotors.Since version 3.2 there seems to be a problem with the RCMAP-function.I am using Graupner mx-20 Hott which has different channels than the Mission Planers wants.I used to adjust that with RCMAP and…
