Gender
Male
About
Location
bcn
Please tell us a bit about your UAV interest
Student
Hometown:
SPAIN
Activity Feed
"It seems that the problem was the mini APM. Tomorrow I'll repeat it with the miniAPM."
"Using a Pixhawk instead of the mini APM, still getting the same error. Timeout finishes and no heartbeat packets received.
EDIT: With the pixhawk IT WORKS."
EDIT: With the pixhawk IT WORKS."
"May it be that mini APM does not support RFD868?"
"Both radios have exactly the same firmware, and exactly the same settings in all the parameters."
"Well, I cannot see any red light flickering. I uploaded a video on YouTube to show you the situation.
https://youtu.be/Rh1DejhjPTM"
https://youtu.be/Rh1DejhjPTM"
"Thanks, I'll check and come back here to comment."
"In the air unit yes.
In the ground unit I don't know since it has a cracass. But I am sure that it's powered on because I am able to upload the firmware with RFD Tools.
Do you think that the ground unit might be defective?"
In the ground unit I don't know since it has a cracass. But I am sure that it's powered on because I am able to upload the firmware with RFD Tools.
Do you think that the ground unit might be defective?"
"Yeah, that's what I'm trying to do. But the 30 sec timeout reaches always the end and then the "heartbeat packets" error popus up."
"The air unit is connected to the miniAPM, and the miniAPM to Mission Planner. And MP recognises the air unit. But when I try to follow this tutorial
http://ardupilot.org/copter/docs/common-connect-mission-planner-aut...
It simply doesn't catch the…"
http://ardupilot.org/copter/docs/common-connect-mission-planner-aut...
It simply doesn't catch the…"
"No, I am trying to connect each one to Mission planner, each one on a computer."
"Yeah, it's detected automatically. I checked it also on the "Device manager" window, and the com port is correct."
"I updated the first post."
"I thought that the names of the FTDI chip pins would be related each one with the ones of the RFD. It's the first time I'm using this type of antennas. I also wonder another thing:
1) When I upload a firmware, I guess it remains saved on the…"
1) When I upload a firmware, I guess it remains saved on the…"
"Well, you were right. It worked. Thanks!!!"
