Gender
Male
About
Location
Antwerp
About Me:
64 year retired engineer with a keen interest in electronics, programming and model aircrafts
Please tell us a bit about your UAV interest
Did some exeperiments over the last 4 years with home built autopilot gear (FIR horizon sensor, GPS and barometric pressure sensor). Decide to step up an buy a APM 2.5 hardware.
Activity Feed
"Hi All,
Yesterday I crashed my model, I really don’t know how it came, I hope someone can shed some light. See the log file in attachment retrieved from the APM after the model was found.
The model has the APM2.5 hardware built in and has been…"
Yesterday I crashed my model, I really don’t know how it came, I hope someone can shed some light. See the log file in attachment retrieved from the APM after the model was found.
The model has the APM2.5 hardware built in and has been…"
Hi to all,In the parameter list published in the Wiki “Appendix”/”Parameters and their meaning” (which is a great help), I read about e.g. the “TKOFF_THR_MINSPD” parameter. However this parameter does not appear in the advanced parameter list of…
Hi,I got my APM2.5 module a few weeks ago and until now I could perform only static (i.e. non flying) tests (I believe it is a good way to get to know the product first). Everything seems to work all right, except for the auto calibration of the…
Hi to all,I intend to operate my autopilot model in a more or less full automated way, a typical mission consisting of a auto take off, a fair number of waypoints and a auto land. For a number of reasons I want to be able to interrupt such a mission…
