Gender
Male
About
Location
Arlington, TX
About Me:
Engineering student. Specializing control and avionics area
Please tell us a bit about your UAV interest
Currently I'm in a project that covers control and avionics design/implementation for UAVs.
Hometown:
Istanbul
Activity Feed
"imu and baro are using the same spi bus."
Guys, I'm flying a blimp indoors and connected APM2.0 to the receiver via Y cables to log radio inputs and sensor outputs. When I look at the log files in dataflash I can see that during the flight all GPS related data are zero since there is no GPS…
We recently bought 900 Mhz xbee modules. We want to use our antennas from the kits we used to have. However there are different size and shape of 900 Mhz and 2.4 Ghz antennas in a box and we cannot differentiate them. What is the method to tell an…
Hello, Which entries in dataflash log files correspond to my radio inputs?Are they only reachable through tlogs. Thanks
"So I will have a battery and a voltage regulator, remove the JP1 jumper then connect battery to pins that says (+ - S) on the input bus, or keep the JP1 jumper, connect battery to pins that says (S 5V -) on the output bus. Is that right? Sorry for…"
"I want to use APM2 board in several a/c as a datalogger. What kind of changes do i have to do in software? Also how am I supposed to power the board if i don't want any connection to aircrafts I will be using."
"I'm also a beginner. For the initial phase, I want to use the board only as a datalogger which will get the sensors and GPS readings of several manually flown air vehicles. Please correct me if anything is wrong with what I think: Board must have…"
