I'm running a Pixhawk with the 10s power module from HK and can't seem to get a current reading.
I've tried multiple combinations of settings in MP and can get a reasonably accurate voltage reading but nothing at all on current for some reason. Tried
Read more…I had a fly away twice today attempting to run the same mission two different times, for some reason on the way to or around the first waypoint the copter would suddenly and violently attempt to take off.
1) I have GPS glitch detection and failsafe en
Read more…Inspired by the fighting walrus unit, decided to machine up a plastic unit and hack up a spare otg cable.
Read more…Thought I'd share progress on a replacement for my heavy lift Trad heli for larger camera work.
Current Specs:
1.23m Carbon octo frame as the base starting point (from fpvhobby.com)
8x Turnigy G46 550kv motors (running just over 1kw each)
8x 60amp escs
8
Read more…Hey gang thought I'd share a bit of holiday hardware hacking I embarked on. I have a go pro 2 and wanted another camera to mess with instead of pulling apart my $250 go pro. The Hobbyking HD Wing II was a good candidate since it it largely uncased an
Read more…Hey gang, thought I would just start a thread on a retrofit I'm doing on a Fury Ion camera ship that I'm going to take into the Arducopter realm. I've got my 3DR hexa running pretty well but need to use the Ion for much larger camera work so it's ti
Read more…