Gender
Male
About
Location
Perth, Western Australia
About Me:
-
Please tell us a bit about your UAV interest
-
Activity Feed
"I think i've managed to fix the problem. I raised the magnetometer a little higher off the main board, and moved the GPS and reciever to different locations so they were furthur away from the megnetometer. The readings now seem reasonable. Thanks to…"
I dont think my magnetometer readings are right. On the configuratior i'm getting around -100 degrees when my quad is facing north (checked against a standard non electronic compass). When I run the compass test sketch I get values around 10…
Hi, I cant seem to get altitude hold to work. When I turn it on the motors just stop. I tried turning it on and the quad just fell out of the sky so I quickly turned it off and the motors came back on. I'm using ArduPiratesNG (rev. 527) and I have…
Hi, I just tried my 1st flight and this was the result: That is with default PID values. Heres a screenshot from configuratior: Does anyone have advice as what values to try next? I am confused with the D value as everything I have read says it…
"I got the replacement and it works. Thanks for the replies."
I received my AeroQuad electronics today and immediately started putting it all together. This is what I got (all bought from the diydrones store): ArduPilot MegaArduPilotMega IMU Shield/OilPan Rev-HMediaTek MT3329 GPS 10HzHMC5843 - Triple Axis…
