Discussions

Arducopter componet weights

Posted by Tanya on May 17, 2011 at 1:50am

Hey

 

I have a MikroKopter Hexacopter frame and plan to integrate the ArduCopter autopilot.

The idea is to design my own frame for the camera mount.

 

Before I can start designing the frame I need to know what the weight is of all the other components on the platform.

 

Can anyone give me the precise weight of the following components please:

 

1 ArduPilotMega IMU Shield/OilPan Rev-H

2 ArduPilotMega Arduino Compatible UAV Controller w/ATMega2560

3 ArduPilotMega power supply

4 HMC5843 - Triple Axis Magnetometer Rev 1.2

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

  • bmarshall5253 May 26, 2011 at 7:41am
    Airspeed sensor with tubes , wire connector and plastic tubing 11.6g
    XtreamBee Board w/o xbee card 7.3g
    I don't have my xbee pro 900 mhz cards yet so no wieght.
  • bmarshall5253 May 26, 2011 at 12:38am
    MediaTek MT3329 GPS 10Hz + Adapter Basic with 2" connector 7.4g
  • bmarshall5253 May 26, 2011 at 12:34am
    ArduPilotMega IMU Shield/OilPan (20.5g) and
    ArduPilotMega Arduino Compatible UAV Controller w/ATMega2560(19.4g) together 40.0g

    HMC5843 - Triple Axis Magnetometer with connector board and cable 1.9g

    power supply? are you talking about a battery?
This reply was deleted.

Activity