Hi everyone.
Got my Pixhawk but the PC do not see it. When I plugged it in to USB, the Pixhawk seemed to me gets alive, but the PC don't see the device, don't installs any drivers. I tried at two PC's and tree OS (Win 7, 8.1, Linux Mint), Mission Planner, APM Planner, Qgroundcontrol also installed, but the same result - PC don't see it. I also checked the USB data lines from the USB cable directly to MCU and it is ok. What can it be? Please help.
You need to be a member of diydrones to add comments!
Replies
My Pixhawk has the same problem as above and I can't find any solutions. Please help!
No, I did not figured out what was wrong with mine, I send back the Pix to the seller.
That is what happening.
https://www.youtube.com/watch?v=yCzs12kiWDg&feature=youtu.be
Is this hardware or software problem? Is this bootloader problem? How to reconfigure anything from zero?
What should I do?
Shot in the dark but make sure the micro SD card is installed. If it is then take it out and reinstall. Let us know if this works or not.