Discussions

Help Charging LiPo Radio Pack

Posted by Michael on February 7, 2014 at 7:26am

 

Hi everyone,  I am new to charging LiPo batteries and want to make sure I am doing things correctly.   I have a 11.1v 8c battery for my radio.  As you can see in the photo it has a number of connections.  I want to charge it, but not sure exactly what end I should use, and where I plug it in on my Thunder AC6 charger.   I believe I use the lead with the 3 black and 1 red, but do I just plug it into the board with all the balance plugs?    Any help would be appreciated.

 

3691096286?profile=original3691096398?profile=original

20140207_100000_Richtone(HDR).jpg

20140207_100210_Richtone(HDR).jpg

You need to be a member of diydrones to add comments!

Join diydrones

Replies are closed for this discussion.

Replies

  • Reid Williams February 7, 2014 at 8:03am
    Hi, the plug with 4 wires needs to plug into the balance board of your charger. Then, depending on what adapter you have you may plug any one of the 4 other wires to the charge leads of your charger. Set the charger for LIPO BALANCE, 11.1v(3s), 1A. Then hit start.


    Recap: plug with 3 black wires and one red needs to plug into the balance board

    Plug one of the other four wires into the charge leads being sure of polarity

    Set charger for LIPO BALANCE, 11.1v, 1A

    Hit start
This reply was deleted.

Activity

Neville Rodrigues liked Neville Rodrigues's profile
Jun 30
Santiago Perez liked Santiago Perez's profile
Jun 21
More…