hello all i have a HKPilot Mega V2.5 setup with an external compas mounted away from everything like you should.
it has the latest 3.1.5 version of arducopter.
when i set up a waypoint mission today, i would set it to fly about 30 waypoints in a small maybe 5 acre area, and in between waypoints it would all of a sudden fly very high, (much higher than the 20m i had it defult set too)
now i need this copter to stay at a 20 metre height the whole time as its flying above an orchard to scare birds.
i seem to think this may be a barometer issue?
should i downgrade the version of arducopter i am using? as its only a cheap HKPilot Mega V2.5.
please share what you think i should do, thank you in advance
Replies
no one? my crops are going to start to be eaten by birds soon :(
around this area on this flight were some powerlines, i dont know if these could cause some electromagnetic interference or something maybe?
and more, thank you
2014-11-21 13-41-26.log
2014-11-21 13-37-55.log
here are some of the test flights over the orchard
please could someone more clever than me review and tell me what im doing wrong, thanks
2014-11-21 14-11-54.log
2014-11-21 13-57-46.log
2014-11-21 13-49-25.log
Please post your .bin or .log dataflash log file from your flight. I would actually consider upgrading to 3.2 vs downgrading. My guess your issue would probably still occur.
nothing?