HobbyKing Pixhawk Clone, the HKPilot32

Looks like HobbyKing gets in the fake purse game once more with the HKPilot32.

3691143548?profile=original

Specs:
Size: 81x44x15mm
Weight: 33.1g
Microprocessor:
32-bit STM32F427 Cortex M4 core with FPU
168 MHz/256 KB RAM/2 MB Flash
32 bit STM32F103 failsafe co-processor
Sensors:
ST Micro L3GD20 3-axis 16-bit gyroscope
ST Micro LSM303D 3-axis 14-bit accelerometer / magnetometer
Invensense MPU 6000 3-axis accelerometer/gyroscope
MEAS MS5611 barometer
Interfaces:
5x UART (serial ports), one high-power capable, 2x with HW flow control
2x CAN
Spektrum DSM / DSM2 / DSM-X® Satellite compatible input up to DX8 (DX9 and above not supported)
Futaba S.BUS® compatible input and output
PPM sum signal
RSSI (PWM or voltage) input
I2C®
SPI
3.3 and 6.6V ADC inputs
External microUSB port

The only improvement over 3dr's is that it comes with a 10s capable power module. It's also $50 cheaper than 3dr. Not much if you ask me. I'll take my 3dr thank you.

More Info

http://hobbyking.com/hobbyking/store/__55561__HKPilot32_Autonomous_Vehicle_32Bit_Control_Set_w_Power_Module.html

Mods, if this is in the wrong category, please move it.

55561.jpg

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

This reply was deleted.

Activity