"As Chris said, you need an accessory bay breakout board. you can get a bare board or a fully assembled.Bare Board *minimum order of 3 and requires you to install JAE 30 pin, Micro USB, zener diode, 4 pin molex click mate and 6-pin molex click…"
"1. yes. to get telemetry you need get the vehicle state. vehicle state has all the attributes that one would see in telemetry data. to fly the drone, there are several methods, but the recommended method is to put the drone in guided and set a…"
"the aux pins are disconnected from the accessory bay. if you want aux pins, you'll need to either tap into them from the main board or connect the aux pins to the respective points the accessory bay connector."
"the fatsharks won't work with glasses. they do have optional diopter lens inserts: -2, -4, -6 dpt that will correct for nearsightedness. the diopter inserts work for me or i'll just wear contacts.
if you need to wear glasses then something like the…"
"The Fatshark Dominator v3 and DominatorHD v2 work well, you just need to use a different hdmi cable than what comes with them. The Zeiss Cinemizer OLED is good too. its discontinued now, but you can still buy them from some stores. And for the price…"
"you just make it up as you go along. running around the internet berating 3DR and the Solo. spewing bullshit as if they are fact. like you're big time and all. When the truth is you are a loser. Tell DJI you need some more help."
"i should add that the latest tower updates lets you control the gopro and shutter manually, but there isn't a waypoint to take a picture and survey doesn't auto trigger the gopro yet."
"currently tower only supports triggering cameras via pwm or relay. while tower supports switching the gopro between photo and video, it will need to be updated to support triggering the shutter."
"Solo uses wifi so you shouldn't turn the GoPro wifi on because it can cause interference. just remove the GoPro and enable GoPro wifi and use the GoPro app for viewing or take the sd card out. You can also enable save to camera roll if you are on an…"
"The functionality to fully control the GoPro, switch modes and settings aren't in the solo app yet. Updates in October (maybe october 3d) and November add this functionality. Today, all you can do is start and stop video in video mode or take a…"
if you feel comfortable using ssh you can ssh into to solo and issue the loadLog.py command. it will retrieve logX or the latest log. it downloads it in seconds to /log where you can move it your local…"