How to start my Hexa drone

 

Hi all,
Everything is ready and connected
3 flight modes programmed (1=Stabilize, 4=Circle, 6 = auto) on a three positions switch)
Then how to take off this marvelous machine ?
Push the throtle stick, try the 3 mode fligths and then ...nothing appends
Thank you for answers....
Alanthecampingboy
3691010116?profile=original

geralfrance.pnh

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Thank you all,

    motors are turning the pb was :

    • I didnt know how to arm the sytem
    • It was really necessary to calibrate the ESCs

    today we try to take off. (: o

    geralfrance.pnh
  • Well, looking at the photo - try attaching the props.

    Seriously, what do you mean "nothing happens"?

    Have you followed the first flight instructions in the wiki? https://code.google.com/p/arducopter/wiki/AC2_Flying

  • When you say "nothing appends", do you mean, Nothing happens..  Like the propellers don't spin when you push the stick?

    If the motors aren't responding, have you armed the APM by pressing the stick to the right and holding it there for four seconds seconds?   Have you calibrated the ESCs?  Have you calibrated the receiver?

  • T3
    A. Start in stabilize mode and learn to fly manually. Keep it low and just get a feel for the controls.

    B. Don't use any other flight modes till you learn to fly really well in stabilize mode. You need to be able to recover other flight modes in stabilize mode.

    C. Once stabilize mode is mastered then move to alt hold. Alt hold is the bases for other flight modes.

    Have fun and fly safe.
    Richard
This reply was deleted.

Activity

Neville Rodrigues liked Neville Rodrigues's profile
Jun 30
Santiago Perez liked Santiago Perez's profile
Jun 21
More…