I am usng a JR radio and according to the manual it says to connect the IN one to channel one on the RX which is my throttle. and connect the ardupilot out one to the rudder which makes no sense to me!I have loaded 2.2.3 and becuse I have no sensors I have a perminant bank on the ground/SDoes 2.2.3 control direction with aileron or rudder or are the ailerons purly for the sensors/level flight. Help would be appreciated
You need to be a member of diydrones to add comments!
JR radio have throttle in channel 1. ArduPilot has throttle on input 3 (1 is ailerons, 2 is elevator).
ArdUPilot is based on the Futaba and other similar connecting channel order.
Correct this and it should be better looking.
Replies
ArdUPilot is based on the Futaba and other similar connecting channel order.
Correct this and it should be better looking.