Hello, does anyone have an idea how to stop the motor one second or something before releasing the shutter to reduce vibrations on a plane for photomapping. After the photo the motor should spin up again automatically.Does anyone have an idea?
You need to be a member of diydrones to add comments!
I Think this is a very, very reasonable request. Imagine if you had a folding prop...... = no prop drag and little loss in stability/speed as most photography platforms are slow flying anyway. This would complement any fixed wing photography plane ( even if everything was balanced perfectly). My Skywalker could certainly do with something like this. Good call Gewe, I hope this goes further and one of those pull request thingies is put in!
Replies
I Think this is a very, very reasonable request. Imagine if you had a folding prop...... = no prop drag and little loss in stability/speed as most photography platforms are slow flying anyway. This would complement any fixed wing photography plane ( even if everything was balanced perfectly). My Skywalker could certainly do with something like this. Good call Gewe, I hope this goes further and one of those pull request thingies is put in!
you should balance the motor/propeller and/or add damping to camera rather than doing something that inefficient.
-
1
-
2
of 2 Next