Anybody using the Turnigy 9x could please share how to do the 6 mode configuration on the transmitter using the aux 3 position mode and other 2 positon switch? including what channels were connected to the APM.
I have been trying to follow some online guides but has not been able to get it working.
Thanks
Patricio
Replies
we went through this some time ago... :)
http://www.diydrones.com/forum/topics/turnigy-9x-modes-setup
works like magic!
I've used the menus to set up the mode switching under er9x firmware which was fairly easy.
You need to connect Ch 6 through to the APM.
This below helped me (if you have the er9X software hack). Download the er9X manual, it helps you navigate menus. Don't know if it works with the stock software.
http://www.diydrones.com/profiles/blogs/another-way-to-set-modes-on...
There are two more ways here:
http://code.google.com/p/ardupilot-mega/wiki/Sixmodes
There is an after market manual for the stock radio that helps with menu navigation. Google for it.
You can adjust and confirm the values in Mavlink under the modes setup menu while you are connected.