APM Plane settings with mission planner ???????

Posted by yuvraj on October 17, 2014 at 6:52pm

How to start with the fixed wing i have done lot of multirotors but I'am new to the fixed wing can any body provide me the steps for making a fixed wing settings of the calibration and every thing which are mandatory settings should i do using mission planner , I have tried in the wiki I haven't understood as much as good still there is an video sorts in the wiki but its all in private can any body help me please ?

I got the frame from FPV Models But I'am waiting for the settings which are provided in the wiki i didn't getting anything from there its out of understand for me so can any body help me out in this sector

Thanks for all 

Yuvraj

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

    • yuvraj > Graham Dyer October 18, 2014 at 12:49pm

      Thanks for reply bro but still I'am confused especially in transmitter program-me some mixing's are there in between 4 channel I don't know how to do it ,as well it is not cleared explain as much arducopter wiki right ? can any body guide me I have done so many multirotors but not Fixed wing.....!!! 

  • Simon Howroyd October 18, 2014 at 1:17am

    Find a local model flying club.

    • yuvraj > Simon Howroyd October 18, 2014 at 2:09am

      there is no body to help me :( so if you know then you can provide me the steps to me !! 

    • Simon Howroyd > yuvraj October 19, 2014 at 1:17am

      Try here.

      There are far too many steps which are different for every single model.  The question you have asked is analogous to, "how do I build a car?" Impossible to answer unless you at least give us a bit of an idea what you want to do!

      LMGTFY
      For all those people who find it more convenient to bother you with their question rather than search it for themselves.
    • yuvraj > Simon Howroyd October 19, 2014 at 2:09am

      Thanks for your reply !!

      Actually see bro I got a plane from FPV models exactly this piece http://www.fpvmodel.com/skywarrior-2030mm-uav-fpv-platform_g28.html  after once i installing the apm and all other stuff like GPS,air speed sensor and RFD module and all other required components.

      Connecting to the Mission planner and uploading the right software afterwords what is the mandatory settings which i have to do so it can fly as an UAV (Autonomous) and I must required the settings(Programming) for Turnigy 9X and I'am using a Rmilec long RF Module

      Conclusion :- It should fly autonomously I need this much of information so that I can try by myself !!

      Help me !!

       Yuvraj

    • Simon Howroyd > yuvraj October 19, 2014 at 2:13am

      Im confused, have you done any of the build yet? Is it all still in bits and you want help with how to plug it all in or have you done all that and just want to know how to set up the software?

    • yuvraj > Simon Howroyd October 19, 2014 at 9:41am

      yes you are right how to setup the software and provide me the sequence steps for it as well I'am new into the Fixed wing but not for the multirotors and I need the programming of transmitter setting how much of mix and all that , you know every thing then share to me I'am waiting !

This reply was deleted.