Need Suggestions on an Ideal FPV Configuration

Posted by Ryan on March 11, 2014 at 10:04pm

I'm interested in getting feedback on the ideal FPV configuration for my soon-to-arrive IRIS from 3DRobotics. I just received a complete DragonLink system but still need to select the video transmitter, receiver and antenna. There is good info here but I'm looking for others' input as well. 

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

  • Charles lakins March 11, 2014 at 11:20pm

    I would say depending on your intention of using goggles or a screen

    if your using a screen a set of 1.2/1.3ghz vtx/vrx 400mw should be fine with a set of RHCP antennas

    if fatshark goggles are your intention get Dominators so you have option to change the rx module and can use 5.8 or 1.3 modules  they are available with a vtx and camera package also then get some 5.8 RHCP antennas for them

    I usually buy most of my video stuff from http://www.surveilzone.com they have excellent service, just overseas

    not everything is listed under fpv specifically (like wireless-transceivers)

    and they don't offer fatshark but do offer another brand of goggles

    Online Shopping for RC FPV Racing Drones, Security Device and Smart Consumer Electronics
    SurveilZone is a trusted online store, supply FPV Camera, RC Racing Drones, FPV Parts, Propellers, Security device, Smart Home, Consumer Electronics,…
This reply was deleted.